loading

Surfactant For Clopyralid

Clopyralid adjuvants were generally composed of non-ionic or zwitterionic ions surfactant, which can be applied to all formulation of clopyralid, including compound formulation. This type of adjuvant is universal, which can not only maintain high preparation stability, but also have good efficacy. Its good wetting and permeability can promote the efficient penetration and absorption of clopyralid and improve the weeding efficiency.
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Surfactant for Clopyralid AS/SL

Clopyralid is an endophytic phytohormone like herbicide. At present, it is mainly used to control broad-leaved weeds such as spinach and endive in rape field with obvious effect. The perennial Compositae weeds such as spinach, endive and so on, which are controlled by them, occur widely in Qinghai Province, and cause serious damage. They have strong root propagation ability, deep root system and strong herbicide resistance, and are difficult to control. In particular, attention should be paid to the study of its adjuvants. adjuvants with high wetting rate and permeability should be selected to reduce the leaf loss of clopyralid solution, promote the high-efficiency internal absorption and penetration of the solution, improve the utilization efficiency of clopyralid, and then achieve the purpose of synergistic effect.


Common formulations of Clopyralid are shown in the table below, if the formulation are not listed in the table, welcome to consult and develop together.

Products

Formulation

Remarks

Clopyralid

300g/L

Acid Equivalents

480g/L

30%

600g/L

For New Zealand and Australia

63%

SG,Acid Equivalents,Clopyralid potassium salt

75%

SG,Acid Equivalents

Clopyralid+Picloram

22.9%+5.7%

Acid Equivalents

24%+6%

67g/L+267g/L

Clopyralid+2,4-D

8%+16%



Previous: 
Next: 

Related Articles

  • Manufacturing Process of 74.7% Glyphosate Water Soluble Granule (WSG/SG)
    Manufacturing Process of 74.7% Glyphosate Water Soluble Granule (WSG/SG)1. Proportion of Raw materialCompositionKg/T (calculated based on the output of 1T SG)Glyphosate TC(95%)714.5Ammonium Hydrogen Carbonate(96%)330Ammonium Sulfate157.3Adjuvant for Glyphosate SG60water content≤0.5% 2. Manufacturing
  • 480g/L Glyphosate-isopropylammonium Salt SL
    480g/L Glyphosate-isopropylammonium Salt SL 1.Proportion of Raw materialCompositionKg/KLGlyphosate TC(95%)374.5Isopropylamine(70%)205Adjuvant S305150Water485.5Defoamerappropriate amountColourantappropriate amountPH:4.7-5.0Density:1.172. Manufacturing Process① Charging: First put the water into the r
  • 200G/L GLUFOSINATE SL
    Glufosinate has been a popular single product of herbicide in the past two years, especially after the use of paraquat was banned in China and other countries. As one of the alternatives to paraquat, the output and demand of glufosinate have increased rapidly. Take China as an example. As the world'
  • 480G/L GLYPHOSATE SL
    The most common formulation of glyphosate SL is 480g/L glyphosate isopropylamine salt SL, which contains about 30.5% glyphosate acid or 41% glyphosate isopropylamine salt. The most popular color of this formulation is red.The routine indicators of glyphosate 480g/L SL are as follows:480G/L GLYPHOSAT
Nanjing GM Technology Co., Ltd. provides efficient and environmentally friendly pesticide adjuvant. You are welcome to consult.
 Contacts: Ms. Jenny
 WeChat: Jennyexpert 
 Whatsapp: +86-15895899905
 Phone: +86-15895899905      
 Email: jenny@njgmtech.com
 Address: No. 121-158, Baihe Road, Nanjing, Jiangsu Province China

SOLUTION

PRODUCT CATEGORY

Copyright © 2023 Nanjing GM Technology Co.,Ltd. All Rights Reserved. | SitemapPrivacy Policy
CONTACT US